Clear and white mdo shrink film factory certificated By SGS

Short Description:

Machine-direction orientation (MDO) film is made where, a polymer film is heated to a temperature slightly below its melting point and stretched in a particular orientation. The film can be cast on an MDO machine, or this step introduced as the last stage in the manufacture of blown films.

Product Detail

Product Tags

Product Description

The benefits of MDO technology are numerous. The process enhances the qualities of the film as a packing material, and reduces immediate costs by stretching it, sometimes by more than 1,000%.

Of course this results in a host of knock-on advantages: less raw material is used, leading to reduced mass and lower transportation costs. Perhaps best of all, MDO film can improve your company's green credentials by shrinking your carbon footprint.

But it's not just about the bottom line, because the MDO process produces a superior product. Stretched film exhibits greatly enhanced optical properties, which can be tailored to your requirements.

If you require a film with low or high gloss, polarisation or haze, these options are achievable by scaling the MDO machine settings. Film treated in this way also has better mechanical properties such as improved puncture resistance and easy tearing in a particular direction ruses of MDO technology.

Because the process also confers resistance to moisture, MDO products are not only used as packing materials, but as the impermeable layer in nappies, sanitary products and incontinence pads.

Some of the films are even made from natural biodegradable compounds.

Despite these applications, the manufacturing process is challenging. It consists of four separate stages, and selecting the wrong settings at any one of them can produce a film that is too brittle. MDO sounds simple, but works profound changes on the properties of the material treated manufacturing process of MDO film.

1. The first step in the MDO process is preheating, where a film is fed into the stretching unit and evenly warmed to the desired temperature.

2. This is followed by orientation, where the film is stretched between a series of rollers that are revolving at different speeds.

3. Next, during the annealing stage, the film's new properties are locked in and made permanent.

4. Finally it is cooled, when the film is brought back to near room temperature.


MOD film


Tubular film 400-1500mm
Film 20-3000mm




Paper cores with inside φ76mm and 152mm.
Plastic cores with insideφ76mm.

Outside winding diameter


Roll weight



All kinds of logistics labels, self-adhesive label substrates, Load-bearing handle belt (rope), contract bag (FFS), vertical packaging.

HDPE Plastic1

HDPE packing film

HDPE Plastic2

HDPE co-extruded film

HDPE Plastic3
HDPE Plastic4
HDPE Plastic5
HDPE Plastic6
HDPE Plastic8
HDPE Plastic9

PE Label 

  • Previous:
  • Next:

  • Write your message here and send it to us